自掺杂SnO2微球的水热合成及其可见光催化性能

本研究采用水热法,以柠檬酸为螯合剂,通过控制n(Sn⁴⁺)/n(Sn²⁺)的数值,合成了由具有丰富氧空位的SnO₂纳米晶体组装成的微球。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)及UV-Vis漫反射光谱对SnO₂纳米微球进行表征分析,结果表明:在酸性水热条件和柠檬酸的螯合作用下,二氧化锡纳米晶体聚集形成微球;在Sn⁴⁺/Sn²⁺摩尔比例为3:7时,其微球尺寸最小,整体分散性较好;同时适量二价锡离子的掺杂使得该样品氧空位浓度达到最佳,氧空位的存在将使得样品光吸收范围拓展至可见光,因而该样品显示出较强的可见光催化效率,在8 min内完全降解甲基橙。     

基于抛光基材的热蒸镀铜箔生长高平整单层石墨烯薄膜

在石墨烯的化学气相沉积工艺中,铜箔是决定石墨烯薄膜质量的重要因素。传统铜箔由于制备工艺的限制,存在大量的缺陷,导致石墨烯薄膜的成核密度较高。本工作选用抛光铝板、抛光不锈钢板、微晶玻璃和SiO₂/Si作为基材,用热蒸镀法制备了不同粗糙度的铜箔,并详细讨论了以该系列铜箔生长高平整度石墨烯薄膜的条件及铜箔对石墨烯薄膜品质的影响。实验结果表明,铜箔以(111)取向为主,与基材分离后,表面具有纳米级平整度。在生长石墨烯后,从SiO₂/Si剥离的铜箔成核密度是4种基材中最小的。同时,从SiO₂/Si剥离的铜箔晶体结构变化最不明显,具有良好的结晶性,表面几乎不存在铜晶界缺陷。当压强为3 000 Pa,氢气和甲烷流速分别为300 mL/min和0.5 mL/min时,可以获得约1 mm横向尺寸的石墨烯单晶晶畴。     

吉林大学物理化学学科:笃学致远 润物无声

伴随建系而生的吉林大学物理化学学科是吉大化学学科的重要组成部分,在70年的发展中为整个化学学科的发展建设做出了重要贡献。吉大物化人一直坚持理论与实践并重的教育思想,培养了大批优秀人才。回顾了吉大物理化学学科的历史沿革,展现了吉林大学化学学院物理化学在课程和教材建设、科学研究和人才培养等方面所取得的成绩。在吉大化学70周年华诞之际,谨以此文向为吉大物化学科建设做出贡献的前辈致敬。     

LaNi0.5Co0.5O3催化剂对甲烷二氧化碳干重整反应在CO2渗透膜反应器中的影响

制备了混合导体膜反应器,通过电化学方法捕获CO2,并将其用于甲烷二氧化碳干重整反应中.采用XRD, SEM,TPR等技术系统研究了LaNi0.5Co0.5O3催化剂在膜反应器中对甲烷二氧化碳干重整反应的影响.结果表明:LaNi0.5Co0.5O3催化剂在甲烷干重整反应中能原位析出纳米金属Ni和Co,对反应起到了较好的催化作用,同时抑制了积碳.催化剂还具有良好的氧化还原性能,可以循环利用.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

无需热处理高炉渣微晶玻璃的制备与表征

采用熔融法熔制具有金色星点的微晶玻璃,制备过程无需热处理.利用DSC-TG、XRD、SEM、EDS、TEM、BSE、FTIR和热膨胀研究该微晶玻璃配合料的高温熔制过程和不同熔制温度、保温时间对微晶玻璃晶体含量、显微结构和性能的影响.研究表明:配合料在850℃生成钙铝黄长石晶体并在1010℃逐渐转变为辉石,配合料在1200℃时大量熔化,仅含有熔点较高的正方铬铁矿石,随着温度的升高,正方铬铁矿溶解,玻璃液中析出绿铬石晶体;晶体含量随着熔制温度的升高而减少,随着保温时间的延长而增加.     

Enhanced CO2 Electrolysis with Metal-oxide Interface Structures

The ever-decreasing fossil fuels and the increasing greenhouse effect have caused substantial concern.Solid oxide electrolyser cell(SOEC)with La_0.75Sr_0.25Cr_(0.5 )Mn_0.5O_3-δ(LSCM)as a cathode was used for CO₂ electrolysis to CO.In this work,the metal-oxide interface was constructed on the LSCM framework by in-situ exsolution and impregnation,and the uniform distribution of metal nanoparticles on the LSCM framework was confirmed by spectroscopy techniques and electron microscopy techniques.The existence of three-phase boundary promoted the absorption and electrolysis of CO₂.(La_0.75 Sr_0.25)0.9(Cr_(0.5 )Mn_0.5)_0.9(Ni_0.5 Cu_0.5)_0.1 O_3-δ(LSCMNC)showed the best electrolytic CO₂ performance at 850℃and exhibited excellent electrocatalytic activity after 100 hours of long-term testing and 8 redox cycles.     

原位合成Bi3O4Br/Bi12O17Br2光催化剂及其对磺胺甲噁唑降解性能

Bi_xO_yBr_z光催化剂在有机药物废水处理领域有着非常广阔的潜在应用价值,但因光生电子和空穴的快速复合而表现出较低的光催化效率,进而限制了其应用范围。通过简易的水解-焙烧法原位制得一种新型的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂,并以磺胺甲噁唑(SMX)为模拟药物污染物进行了光催化性能测试,对所制催化剂进行了X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)、电化学阻抗(EIS)、光致发光光谱(PL)等表征。结果表明所制备的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂具有较强的光生载流子分离率、较低的界面电荷转移电阻,进而展示出优异的光催化降解SMX性能,在模拟太阳光下照射30 min,SMX降解率达到87%,相较于纯的Bi₃O₄Br和Bi₁₂O₁₇Br₂催化剂,降解率分别提升了30%和24%。最后基于自由基捕获实验和催化剂能带结构分析了所制催化剂的降解机理。     

高能量密度型锂离子电池正极材料LiNi0.5Mn1.5O4改性的研究进展

尖晶石镍锰酸锂(LiNi0.5Mn1.5O4)具有工作电压高、结构稳定、适合快充快放等特性成为高能量及高功率密度型正极材料的有力竞争者.结合了近几年的研究报道,介绍了LiNi0.5 Mn1.5O4的结构、制备方法、改性方法及其应用前景,着重介绍了LiNi0.5 Mn1.5O4材料晶型结构对其性能的影响,并指出该材料目前存在的问题和研究重点.     

X-ray Crystallographic Characterization of the Swine MHC I Molecule SLA-3*0202 Complexed with IAV-HA Nonapeptide

The swine major histocompatibility complex (MHC) class I molecules are also called swine leukocyte antigen (SLA), and most of the highly polymorphic SLA genes are associated with swine diseases. However, the well documented structural reports on swine MHC I molecules remain quite limited. In order to clarify the structural characteristics of the Chinese heishan wild boar MHC class I molecule, SLA-3*0202 and swine β2-microglobulin (sβ2m) with a KMNTQFTAV nonapeptide derived from Influenza A virus Hemagglutinin protein (IAV-HA) were assembled and crystallized. The crystal diffracted at 1.55 Å resolution and belonged to the sp. gr. C121, with the unit-cell parameters a = 206.46 Å, b = 41.47 Å, c = 106.74 Å. The Matthews coefficient and solvent content were calculated to be 2.30 ų Da^–1 and 46.64%, respectively. The availability of the structure, which is being solved by molecular replacement, will provide new insights into swine MHC I presenting IAV peptides.